En el caso de cisco no es muy común ver caer los equipos, pero utilizando una suerte de "comando oculto" podemos ver la forma en que caen y se recuperan de los errores.
Este comando oculto se llama test crash y se puede utilizar de la siguiente forma:
Router#test crash
WARNING: Command selections marked with '(crash router)' will crash
router when issued. However a selection 'C' will need to
be issued IMMEDIATELY before these selections to enable them.
Type the number for the selected crash:
--------------------------------------
1 (crash router) Bus Error, due to invalid address access
2 (crash router) Bus Error, due to parity error in Main memory
3 (crash router) Bus Error, due to parity error in I/O memory
4 (crash router) Address Error, due to fetching code from odd address
5 (crash router) Jump to zero
6 (crash router) Software forced crash
7 (crash router) Illegal read of address zero
8 (crash router) Divide by zero
9 (crash router) Corrupt memory
C Enable crash router selection marked with (crash router)
R (crash router) User enter read bus error address
U (crash router) User enter write bus error address
W (crash router) Software watchdog timeout (*** Watch Dog Timeout ***)
w (crash router) Process watchdog timeout (SYS-2-WATCHDOG)
d Disable crashinfo collection
e Enable crashinfo collection
i Display contents of current crashinfo flash file
m Write crashinfo on crashinfo RAM
n Change crashinfo flash file name
q Exit crash menu
s Save crashinfo to current crashinfo flash file
c Close current crashinfo flash file
t Write crashinfo on console TTY
x Exit crash menu
? C
Type the number for the selected crash:
--------------------------------------
1 (crash router) Bus Error, due to invalid address access
2 (crash router) Bus Error, due to parity error in Main memory
3 (crash router) Bus Error, due to parity error in I/O memory
4 (crash router) Address Error, due to fetching code from odd address
5 (crash router) Jump to zero
6 (crash router) Software forced crash
7 (crash router) Illegal read of address zero
8 (crash router) Divide by zero
9 (crash router) Corrupt memory
C Enable crash router selection marked with (crash router)
R (crash router) User enter read bus error address
U (crash router) User enter write bus error address
W (crash router) Software watchdog timeout (*** Watch Dog Timeout ***)
w (crash router) Process watchdog timeout (SYS-2-WATCHDOG)
d Disable crashinfo collection
e Enable crashinfo collection
i Display contents of current crashinfo flash file
m Write crashinfo on crashinfo RAM
n Change crashinfo flash file name
q Exit crash menu
s Save crashinfo to current crashinfo flash file
c Close current crashinfo flash file
t Write crashinfo on console TTY
x Exit crash menu
? 6
Causing a software forced crash...
10:44:18 UTC Fri Feb 5 2010: Breakpoint exception, CPU signal 5, PC = 0x6078406C
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 0x6078406C 0x60254650 0x61366294 0x6138C3B4 0x626264B8 0x6262649C
$0 : 00000000, AT : 654E0000, v0 : 00000049, v1 : 000000A7
a0 : 651A5158, a1 : 00000320, a2 : 63D143E8, a3 : 66ED5C38
t0 : 66ED5C38, t1 : 6590FE60, t2 : 927C0000, t3 : 00000000
t4 : 000008B7, t5 : 00000F3B, t6 : 00000000, t7 : 00000000
s0 : 64CA0000, s1 : 0000003C, s2 : 00000036, s3 : 653D0000
s4 : 66F08DB0, s5 : 64CA0000, s6 : 6597DAD8, s7 : 64CA0000
t8 : 6640BE78, t9 : 0000B798, k0 : BFC003E0, k1 : 0000FF00
gp : 65068FA8, sp : 66F08D98, s8 : 648E0000, ra : 60254650
EPC : 6078406C, ErrorEPC : 00000000, SREG : 3400FF03
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
CacheErr : 00000000, DErrAddr0 : 00000000, DErrAddr1 : 00000000
Cause 00000024 (Code 0x9): Breakpoint exception
File bootflash:crashinfo_20100205-104418 Device Error :Bad device info block
File disk0:crashinfo_20100205-104418 Device Error :Invalid DOS media or no media in slot
File disk1:crashinfo_20100205-104418 Device Error :No device available
File slot0:crashinfo_20100205-104418 Device Error :Bad device info block
File slot1:crashinfo_20100205-104418 Device Error :No such device
File bootflash:crashinfo_20100205-104418 Device Error :Bad device info block
File disk0:crashinfo_20100205-104418 Device Error :Invalid DOS media or no media in slot
File disk1:crashinfo_20100205-104418 Device Error :No device available
File slot0:crashinfo_20100205-104418 Device Error :Bad device info block
File slot1:crashinfo_20100205-104418 Device Error :No such device
File bootflash:crashinfo_20100205-104418 Device Error :Bad device info block
10:44:18 UTC Fri Feb 5 2010: Breakpoint exception, CPU signal 5, PC = 0x6078406C
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 0x6078406C 0x60254650 0x61366294 0x6138C3B4 0x626264B8 0x6262649C
$0 : 00000000, AT : 654E0000, v0 : 00000049, v1 : 000000A7
a0 : 651A5158, a1 : 00000320, a2 : 63D143E8, a3 : 66ED5C38
t0 : 66ED5C38, t1 : 6590FE60, t2 : 927C0000, t3 : 00000000
t4 : 000008B7, t5 : 00000F3B, t6 : 00000000, t7 : 00000000
s0 : 64CA0000, s1 : 0000003C, s2 : 00000036, s3 : 653D0000
s4 : 66F08DB0, s5 : 64CA0000, s6 : 6597DAD8, s7 : 64CA0000
t8 : 6640BE78, t9 : 0000B798, k0 : BFC003E0, k1 : 0000FF00
gp : 65068FA8, sp : 66F08D98, s8 : 648E0000, ra : 60254650
EPC : 6078406C, ErrorEPC : 00000000, SREG : 3400FF03
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
CacheErr : 00000000, DErrAddr0 : 00000000, DErrAddr1 : 00000000
Cause 00000024 (Code 0x9): Breakpoint exception
-Traceback= 0x6078406C 0x60254650 0x61366294 0x6138C3B4 0x626264B8 0x6262649C
=== Flushing messages (10:44:18 UTC Fri Feb 5 2010) ===
Buffered messages:
*Feb 5 10:42:15.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Feb 5 10:42:15.171: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to down
*Feb 5 10:42:15.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface IPv6-mpls, changed state to up
*Feb 5 10:42:16.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
*Feb 5 10:42:17.503: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(11)T2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 01-May-07 04:19 by prod_rel_teamDe más está decir que se debe usar en equipos que no estén en producción... después no me culpen si bajaron su red por usarlo en cualquier lado.
Salute!
No hay comentarios:
Publicar un comentario